MacroSystem Digital Video HDV-Recorder Instrukcja Użytkownika Pobierz pdf (Strona 83)

Bogart SE 5 User manual

•Whendeterminingthepositionforarange,thefollowing

menu is displayed against the background of the current video:

The position of a range is determined either from the start

point (Start) or the end point (End), or by means of the arrow

buttons < and >.

(j) There are two play buttons at your disposal.

•Theleftplaybuttonplaysonlythesampleyouarepresently

editing, i.e. the one displayed in the envelope curve.

•Therightplaybuttonplaysalsoalltheothersoundtracks.

This way, you can check the overall sound of all sound tracks.

Use the play button to play the audio sample currently shown

in the wave form display. The play position in terms of time is

shown to the left of the play button in minutes:seconds:frames.

The current play volume is shown on the volume display. Play

can be stopped at any time by means of the Stop button.

Click on OK to terminate editing of the wave form and to ac-

cept the settings. Please note the following:

•TheVolumeandCorrectioncontrolsarenolongeravail-

able for the edited audio sample following editing of the wave

forms. You can therefore no longer modify the volume of the

wave form audio sample by means of the Volume control, nor

the volume of a parallel audio sample in relation to the wave

form audio sample by means of the Correction control.

•Insertionofafadeintoawaveformaudiosampledeletesthe

edited wave form (following a prompt). All changes to the wave

form audio sample are then lost.

•Indirectvolumecontrolofawaveformaudiosampleisstill

possible by Correction from another audio sample. Creation

must however be repeated.

•Audioeffectsmaybeinsertedintowaveformaudiosamples.

•Thesampleenveloperemainsifyouhavetrimmedormoved

the audio sample.

(16) Click onto the ‘Sample’ button. A window similar to the

‘Scene’ video effect menu will appear. At ﬁrst, you can see

the name of the sample, which can be changed if needed. The

default name is the name of the sample. Next, you can decide

if you want to create a sample that runs across the length and

position of the selected sample, combining all audio tracks in

that position. To do this, click onto ‘Sample’ and then ‘OK’.

The sample will then be added to the ‘Audio Record /Edit’

screen.

Another possibility is the ‘Sample + Scenes’ function. Here,

you can determine that the new sample starts at the beginning

of the ﬁrst scene - and ends at the end of the last scene it is

positioned under.

Alternatively, you can select any time range for creating the

new sample. A sample is created, containing all sound from

determined either by Position or by stepping through individual

frames. Click on the right-hand trackball button to adopt the

selected setting. Use the level slider to select the volume at

the desired point in time. Follow the same procedure with the

remaining points in the volume display until the desired result

is achieved. Then create the result.

rently selected (green) point in the volume display. Note that

a point cannot be inserted between two points located very

close to each other.

(d) Use the Remove button to delete the selected editing point

from the volume display.

(e) The Range button can be used to group several adjacent

editing points to form a range, i.e. a common group:

•Marktheouterleft-hand(rst)pointofthedesiredrangeby

left-clicking it or by stepping through individual frames.

•ClickonRange

•Marktheouterright-hand(last)pointofthedesiredrangeby

left-clicking it. All points within the marked range also change

to green and are thus marked as active. The following func-

tions can now be used on this range:

•Increaseorreducethevolumelevelfortheentirerange.Use

the Level slider for this purpose.

•Movetheposition.UseeitherthePositionslider,orselect

the position by means of Range.

•Deleteallpointsintheselectedrange.ClickonRemovein

this case. Click in the scrollbar beneath the volume display or

on any point to terminate selection of the range.

(f) The Level determines the volume of the active (green) edit-

ing point or of the selected range. The volume can be selected

in steps of 1 dB from -30 dB to +30 dB.

(g) Use Position to determine the position (in time) of a point or

a range in the volume display.

(i)

Use Range to determine the position of an editing point

or a range according to its location within the video.

•Duringdeterminationofthepositionofanindividualpoint,

the following menu is displayed against the background of the

current video:

Determine the position of the selected point either using the

scrollbar following activation of the Position switch, or by

means of the arrow buttons < and >.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 111 112

Komentarze do niniejszej Instrukcji

Brak uwag

MacroSystem Digital Video HDV-Recorder Instrukcja Użytkownika Strona 83

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Cyfrowe rejestratory wideo (DVR) MacroSystem Digital Video HDV-Recorder